YAESU FT-252 HT VHF TRANSCEIVER
YAESU FT-252
Description
-
The FT – 252 is a compact submersible*, high – performance FM hand-held providing up to five watts of RF power, and aa wealth of convenient features for 2- meter amateur band operations. Additional features include a transmit time out timer(TOT), automatic power – off (APO), Automatic repeater shift(ARS), YAESU’s exclusive auto transponder system(ATS), which “beeps” the user when moving out of communications range with another ATS equipped station; and an RF squelch circuit which allows adjusting the squelch to open at a programmed setting of the S-Meter, thus reducing guesswork in setting the squelch threshold. We appreciate your purchase of the FT-252, and encourage you to read this manual thoroughly. You will learn about the many exciting features of your exciting new YAESU hand held transceiver.
*IPX5 water submersible.
Specification
-
Frequency range RX 136 - 174 MHz TX 144 - 146(148)MHz Channel steps 5/10/12.5/15/20/25/100kHz Frequency stability ±5ppm Repeater shift ±600kHz Emission type F2, F3 Antenna Impedance 50Ω Supply voltage nominal 7.4 V DC (Negative Ground) Operating 5.0 - 10.0 V DC (EXT DC Jack) Current consumption 200mA (Receive, 200mW output) (Approx @7.4V) 70mA (standby, saver off) 25mA(standby, saver on) 0.5 mA (Auto power off) 1.6A (5 W TX) Operating temperature : -4° to 140°F (−20°C - +60°C) Case size 2.45" x 4.74" x 1.52" (62 x 120.5 x 38.5 mm) Weight 9.9 Oz (280 g) Transmitter RF Power outut 5W(High) / 2W (middle) / 0.5W(low) Modulation type Variable reactane F2, F3 Spurious Emission at least 60dB down(@high and middle power) at least40 dB down(@low power) Maximum deviation ±5kHz(F2,F3) Microphone impedance 20Ω Reciever Circuit type Direct conversion Sensitivity 0.5μV for 12 dB SINAD (144 - 146 MHz) Selectivity 12kHz/35 kHz(-6dB / -60dB) AF Output 800mW @16Ω for 10% THD (@7.4 V) In The Box
-
- Unit
- Charger
- Battery
- Clip
- Antenna
- Manual book