ICOM V-85 HT VHF TRANSCEIVER
ICOM V-85 HT VHF TRANCEIVER
Description
-
Features
- Weather channel receive with weather alert*
- Automatic repeater function*
- Reversible control knob and up/down button assignment
- PC cloning capability
Compact body
While the IC-V85 provides a full 7 watts of output power, its 110mm* body height is compact enough to allow for easy carrying.
7W of high output power
Let the power of 7 watts extend your communications range. With its large capacity Lithium-Ion battery pack, BP-227, the IC-V85/E provides a practical 7 hours* of operating time. Reduced power (4W/0.5W) settings are also available for even longer operating time.
* Typical operation with Tx: Rx: standby=1:1:8.
External DC power jack
An external DC power jack allows for operation when used with the external DC power supply (11.0V DC). Your IC-V85/E receives and transmits as it charges.
Water resistant construction
The water resistant construction, equivalent to IPX4 rating, provides reliable operation in wet conditions for practical outdoor usage.
107 memory channels and 10 memory banks
Up to 107 memory channels can be stored. Use the 5-character display capabilities to assign your own individual channel names, then store those channels in any of the 10 memory banks. The DMS (Dynamic Memory Scan) system allows you to scan selected memory banks by simply adding and deleting bank links.
Built-in CTCSS/DTCS
Built-in CTCSS/DTCS tone codes provide quiet stand-by and allows you to use tone-access repeaters. The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the tone frequency used in the received signal.
DTMF memory and optional DTMF decoder
16 DTMF memory channels with up to 24 DTMF codes enable you to perform remote control operation. The optional DTMF decoder unit, UT-108, provides code squelch operation and pager function.
Specification
-
General Frequency coverage Version Tx Rx (Working range) (unit : MHz): USA 144–148 136–174*1 Europe 144–146 136–174*2 Guaranteed range *1 144–148MHz, *2 144–146MHz Mode FM No. of memory Ch. 107 (incl. 6 scan edges and 1 call) Operating Temp. range –10°C to +60°C ; +14°F to +140°F Frequency stability ±2.5ppm (–10°C to +60°C) Power supply requirement BP-226/BP-227 or 11.0V ± 15% (External DC in) Current drain (at 7.2V DC) Tx High (7W) 2.6A Rx Max. audio 250mA Stand-by 80mA Power save 30mA Antenna impedance 50Ω (BNC) Dimensions (W×H×D) 56 × 110 × 34.4 mm; (Projections not included) 27⁄32× 411⁄32× 111⁄32 in Weight (approx.) 310g; 12.5oz (with BP-227 and Ant.) Transmitter Output power (at 7.2V) 7.0/4.0/0.5W (High/mid/low) Spurious emissions Less than –60dBc Max. freq. deviation ±5.0kHz External microphone 3-conductor 2.5(d)mm (1⁄10″) /2.2kΩ connector Receiver Intermediate freq. 46.35MHz/450kHz (1st/2nd) Sensitivity Less than 0.2μV (at 12dB SINAD) Squelch sensitivity Less than 0.16μV (threshold) Selectivity More than 55dB Spurious and image More than 60dB rejection Intermodulation More than 55dB Audio output power More than 300mW with an 8Ω load Ext. speaker connector 3-conductor 3.5(d) mm (1⁄8″) /8Ω In The Box
-
- Unit Icom IC-V85
- Battery
- Ac adaptor
- Battery charger
- Antenna
- Beltclip
- Strap
- Manual book